The Grotto

Welcome to Joe’s Bar and Theater

Running the Audio

Big Joe

Back of the RackThe plan for the basement is to have speakers wired from the rack to the family room, the deck, the bar, and the theater:

• Family Room – Two Speakers
• Deck – Two Speakers
• Bar – Five Speakers and One Subwoofer
• Theater – Seven Wall Speakers, Four Overhead Speakers, Two Subwoofers, Two Sets of Transducers

All total, that’s 24 channels of audio going to the rack. In this pic of the back of the rack, the bottom two rows are the connections to all 24 channels, with the four at the right already connected to the family room and deck.

Family Room SpeakersBefore the basement ceiling can be drywalled and closed, I have to install the speakers in the family room and the deck. I’m running these with as the same zone, so what’s playing on one will play on the other. My thought is that if we want to listen to something on the deck, we’ll use the tv in the family room to view/control it. Or, we’ll use a phone app to control it while out on the deck.

Installing the family room speakers involved cutting a couple of rather large holes in one wall of the room, making a bunch of drywall dust in the process. While the initial mess had the wife a bit nervous, the final result had her rather pleased. Eventually, these will be painted to match the wall.

deckspeakerOur deck isn’t very big—12’x16′. We decided on a smaller deck with the thought that we’ll eventually have a very large patio below on to which our entertainment level (i.e., the basement) will open. Because we don’t want to disturb our neighbors (at least too much), I put the speakers on the outside corners of the deck, aimed up at the seating area. This way, sound is aimed away from the surrounding houses, and reflections off the house will be aimed up and away, instead of directed at our neighbors. When the wife is at ground level in the backyard, which is 14 feet below the deck, I have to get the system uncomfortably loud before she can hear anything.

The bar speakers will all be in-ceiling speakers, with the three front LCR speakers being angled at the TV, so that primary sound should be heard as reflections from the TV and wall, instead of the listener hearing the sound coming from the ceiling. I’m still not sure how effective this’ll be, but as the primary purpose of these speakers will be watching sports at the bar, I’m not too concerned.

Front of Bracket

Back of BracketFor the speakers in the theater, all of them will be in-wall and in-ceiling speakers, so that when the room is finished, they’ll all be invisible. Normally, in-wall and in-ceiling speakers fasten directly to the drywall, which works well; however, I wanted the theater speakers to be more solidly attached, so I made brackets out of OSB and 2x3s. They’re solidly attached to the framing using deck screws.

Running the Audio

  1. Cleide says:

    Those home theater in a box are not very deapndeble or reliable and most of them are cheaply made. Wireless speakers still need some type of signal device to send and receive signal which can be distorted by other signal like appliance in your home. You will not see any very high end system that is costing more than $10,000 using wireless technology. Check the system you are looking at to see if it is wireless or not. Hope this will help you out.

Leave a Reply

Your email address will not be published.

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Copyright © 2017 The Grotto